How to Adjust BLUM Cabinet Door Hinges: A Step-by-Step Guide

Properly adjusted cabinet doors should have even gaps, consistent alignment, and a flush appearance. Modern concealed hinges make this easier by allowing the door to be adjusted in three directions: side, height, and depth.

Slide Adjustment

The side adjustment controls the door from left to right. Turning the front adjustment screw changes the amount of door overlay, allowing you to create an even gap between neighboring doors.

This adjustment is especially important when several cabinet doors are installed next to each other. Small changes can make a big difference in the overall appearance.

Height Adjustment

The height adjustment moves the door up or down. This allows you to align the top and bottom of the door with adjacent doors and drawers.

For hinges with cam-style mounting plates, rotate the cam screw to adjust the position. With non-cam mounting plates, loosen the screws, position the door, and then retighten them.

Depth Adjustment

The depth adjustment controls how far the door sits in or out from the cabinet. This is what helps achieve the flush, consistent face that gives cabinetry a professional finish.

If the door sits too far forward or too far back, use the depth adjustment to bring it into the correct position.

The Takeaway

Side = left and right. Height = up and down. Depth = in and out.

Taking the time to make these small adjustments ensures clean lines, even reveals, and a professional-looking cabinet installation.